日本菊水 高次谐波/闪变分析仪 OP02-KHAS (SPEC40425)

Control   type

Resistive   load method (forced air cooling)

Input   voltage range

Single-phase   100 VAC to 240 VAC

Input   voltage type

Single-phase   two-wires
  Single-phase three-wires (change by per phase)
  Three-phase four-wires (change by per phase)

Input   current

2.3   A ±5 % (when at the setting voltage of 230 V)
  1.0 A ±5 % (when at the setting voltage of 100 V)
  *Maximum power when through the phase contorl

Allowable   current for the external
  load connecting terminal

Approx.   maximum 10 A

Harmonic   generation method

Phase   control

Phase   angle variation range

Approx.   10 to 170 (when at the setting voltage of 100 V or 230 V)

Thermal   protection

Yes   (ALARM lights on, a buzzer sounds)

Flicker   generation method

Square-wave   ON/OFF control by the electronic timer

Flicker   frequency setting range

Approx.   0.5 Hz to 20 Hz

Warm-up   time

Approx.   10 minutes

Power   supply for the activation

Single-phase   86 VAC to 264 VAC, less than 75 W
  (possible for common use of the measurement circuit)

Withstanding   voltage

Between   the Input and FG (Frame Ground) 1830 V, less than 5 mA

Dimensions

214   (W) × 124 (H) × 400 (D) mm (Excluding the projected components)

Weight

Approx.   6 kg