TECHNICAL SPECIFICATIONS | IPG 2554 |
Mainframe |
|
Microprocessor controlled touch panel | 7”, capacitive |
Optical Ethernet Interface for remote control of the generator | optional |
Interface for saving reports | USB |
External trigger input/ output | Switch/ 10 V |
Coupling-/decoupling network for power supply lines | L1, L2, L3, N, PE |
Connector for external safety interlock loop | 24 V = |
External red and green warning lamps | 24 V=, 40 mA |
Mains power | 90V - 264V, 50/60 Hz |
Dimensions of desk top case W * H * D | 450*330*500 mm3 |
Weight | 35 kg |
Slow damped oscillatory |
|
Peak1 open circuit voltage | 200V to 3 kV ( 10%) |
Oscillation frequencies | 100 kHz 1 MHz ( 10%) |
Repetition rate | 40 Hz 400 Hz ( 10%) Range: (40 – 400Hz) |
Voltage rise time (first peak) | 75 ns 20% |
Voltage decay | Peak5 > 50 % of Peak1 value Peak10 < 50 % of Peak1 value |
Polarity of the first half-period | positive and negative |
Burst duration | continuous |
Test time | 1 - 1000s |
Output impedance | 200 20% |
HV-output | HV-OUT, 4 mm connector |
Monitor output | 100:1 5% |
Specifications short circuit: |
|
Short circuit current (Peak1) | 1.25 A to 12.5 A (± 20 %) |
Fast damped oscillatory |
|
Peak1 open circuit voltage | 200V to 4 kV ( 10%) |
Oscillation frequencies | 3 MHz 10 MHz 30 MHz ( 10%) |
Repetition rate | 5000/s ( 10%) Range: (40 – 5000Hz) |
Voltage rise time (first peak) | 5 ns 30% |
Voltage decay | Peak5 > 50 % of the Peak1 value Peak10 < 50 % of the Peak1 value |
Polarity of the first half-period | positive and negative |
Burst duration | 3 MHz: 50 ms ( 20%) 10 MHz: 15 ms ( 20%) 30 MHz: 5 ms ( 20%) Range : (1ms – 50ms) |
Burst period | 300 ms ( 20%) Range: (300ms – 1000ms) |
Test time | 1 - 1000s |
Output impedance | 50 20% |
HV-output | HV-OUT, Fischer connector |
Specifications short circuit: |
|
Current rise time | 3 MHz: < 330 ns 10 MHz: < 100 ns 30 MHz: < 33 ns |
Current oscillation frequencies | 3, 10 and 30 MHz (± 30 %) |
Decaying | Peak5 > 25 % of the Peak1 value Peak10 < 25 % of the Peak1 value |
Short circuit current (Peak1) | 5 A to 80 A (± 20 %) |
Coupling- / decoupling network for AC/DC power supply ports | CDN 2554-16 |
Coupling capacitor, slow pulses | 0.5 µF |
Coupling capacitor, fast pulses | 33 nF |
Isolation withstand capability of the coupling capacitors with the 1.2/50µs wave | 5 kV |
Supply current rating / voltage rating | 16 A / 250 V |
Number of lines | 4 + PE |
Coupling mode | line to line or line to ground |
Common mode decoupling (attenuation) | 20 dB |
Differential mode decoupling (attenuation) | 30 dB |
Input line terminal: L1-L4, GND | 4 mm connector |
Output EUT terminal: L1-L4, GND | 4 mm connector |
|
|
|
