产品介绍
高压脉冲发生器 IPG 2025 和 IPG 2436 可产生波形为 1.2 / 50 μs 的标准脉冲电压,符合 IEC 60060 标准。它们设计用于根据标准测试组件、绝缘、空气和表面闪络间隙的脉冲介电强度。
测试电压的峰值可在 2 - 20 kV 或 2 - 24 kV 范围内连续调节。可选择输出电压的正极性或负极性。内置的 1000:1 分压器允许在测试期间监控脉冲输出波形。
技术参数
TECHNICAL SPECIFICATIONS | IPG 2025 IPG 2436 | |
Mainframe | ||
Microprocessor controlled touch panel | 7”, capacitive | |
Optical Ethernet Interface for remote control of the generator | Optional | |
Interface for saving reports | USB | |
External Trigger input/ output | Switch/ 10V | |
Connector for external safety interlock loop | 24 V= | |
External red and green warning lamps | 24 V=, 40 mA | |
Mains power | 90V – 264V / 50/60 Hz | |
Dimensions of desk top case W * H * D | 450*180*500 mm3 | |
Weight | 18kg | |
HV-Generator section | ||
Peak value of impulse output voltage, adjustable, ± 5 % | 2.5 - 20 kV | 2.5 - 24 kV |
Waveform of impulse output voltage, acc. to VD 0433, IEC 60060 | 1.2/50 µs ± 30 % / 20 % | |
Max. stored energy | 25 Joule | 36 Joule |
Energy storage capacitor Cs | 0.125 µF | |
Resistor in series to the output HV1 Rs1 | 500 | |
Resistor in series to the output HV2 Rs2 | Standard 200 (opt. 40 or 50) | |
Output polarity, selectable | pos / neg / alt | |
Trigger : | ||
a) manual | Push button | |
b) external Trigger input | Switch | |
c) internal, automatic, adjustable via test procedure | 1 - 1000 Impulse | |
Repetition time, selectable | 5 - 1000 s | |
CURRENT SENSE | built-in | |
Threshold value, selectable | 1 - 1250 µAs | 1 - 1500 µAs |
Impulse voltage divider, built-in | 1000:1 ± 2 % | |
Mains synchronous triggering, phase shifting, digitally selectable | 0 - 359°, step 1° | |
HV output, HV-OUT | HV Plug | |
Accessories: power cable, turn key, instruction manual |