TECHNICAL SPECIFICATIONS | Multi CE5 |
Mainframe |
|
Microprocessor controlled touch panel | 7”, capacitive |
Optical Ethernet Interface for remote control of the generator | optional |
Interface for saving reports | USB |
External trigger input/ output | Switch/ 10 V |
Connector for external safety interlock loop | 24 V = |
External red and green warning lamps | 24 V=, 40 mA |
Mains power | 90V - 264V, 50/60 Hz |
Dimensions of desk top case W * H * D | 450*180*500 mm3 |
Weight | 25 kg |
Internal 1-phased de-/coupling network (CDN) |
|
Coupling-/decoupling network for power supply lines | L1, N, PE |
Nominal voltage, nominal current | 300 V, 16 A » / 300V, 16 A = |
Coupling impedance (depending on the generator) | 33 nF / 18 µF / 9µF+10W |
BURST acc. to IEC 61000-4-4: 2012 |
|
Pulse output voltage, adjustable | 0.2 - 5 KV ± 10 % |
Waveform | 5/50 ns |
Source impedance | 50 W |
Polarity, selectable | pos/neg/alt |
Burst frequency, adjustable | 1.0 kHz - 1.0 MHz |
Burst duration, adjustable | 0,01 ms - 25 ms |
Burst period, adjustable | 10 ms - 1000 ms |
HV output for external coupling devices | coaxial |
Monitor output for pulse output voltage | ratio = 100:1 ± 5%, 50 W |
SURGE acc. to IEC 61000-4-5: 2014 |
|
Test voltage (open circuit condition) | 0.2 - 5.0 kV ± 10 % |
Waveform acc. to IEC 60060 | 1.2 / 50 µs ± 30/ ± 20 % |
Test current (short circuit condition) | 0.1 - 2.5 kA ± 10 % |
Waveform acc. to IEC 60060 | 8 / 20 µs ± 20% |
Polarity of output voltage/current, selectable | pos/neg/alt |
Maximum stored energy | 120 Joule |
Charging time for max. charging voltage | max. 1Hz (min. 1 – 10 s) |
HV output isolated from ground | HV-OUT, 4mm |
Mains synchronous triggering, phase shifting, digitally selectable | 0 - 359°, step 1° |
Monitor output for pulse output voltage | ratio = 1000 : 1 ± 5% |
Monitor output for pulse output current | 10 V º 5 kA ± 5% |
POWER FAIL acc. to IEC 61000-4-11/29: 2020/2020 |
|
Rated current / Inrush current, max. | 16 A / 500A |
Monitor output for mains voltage and mains current | built-in |
AC |
|
Rise and fall time at 100W load | 1 – 5 µs |
Dip durations | 0 – 10000 cycles (0 – 200 s) (step with 1° º 55,56µs at 50Hz) |
Display of mains voltage, mains current and inrush current |
|
DC |
|
Rise and fall time at 100W load | 1 – 50 µs |
Dip durations | 1ms – 10s |
Interface for control of an external power source |
|
