| 型号 | LC1202 系列 |
Average Capacitor Charging Power | 12,000 Joules/sec (½CV2 x Rep Rate) |
Peak Capacitor Charging Power | 13,500 Joules/sec (½CV2 ∕ tcharge) |
Average Continuous DC Power | 15,000 Watts (1) |
Output Voltage Range | 1, 2, 4, 5, 10, 15, 20, 30kV, variable from 10-100% of rated |
Polarity | Available as fixed Positive or Negative. Please specify at time of ordering |
HV Output Cable | All Models - DS2214 Coaxial cable with proprietary HV connector |
HV Insulating Medium | XIAMETER® PMX-561 Transformer Liquid |
AC Input Voltage, Current | 208VAC (180-264) 3Ø, 50A max - Suffix 3P208 or 400VAC (340-460) 3Ø, 26A max - Suffix 3P400 or 480VAC (432-528) 3Ø, 20A max - Suffix 3P480 specify at time of ordering |
AC Connector | UL/CSA approved terminal block. 3Ø + |
AC Line Contactor | UL/CSA approved AC line contactor (standard on LC1202L and S, option for OEM) |
Power Factor | Passive PFC pf = 0.9 at full load and nominal AC line |
Efficiency | Better than 90% at full load |
Front Panel | LC1202L - Voltage Control, Voltage & Current Meters, Status Indicators |
LC1202S - On/Off Switch, Status Indicators |
LC1202-OEM - Blank front panel |
Stability | 0.2% per hour after 1 hour warmup |
Temperature Coefficient | 100ppm per °C typical |
Stored Energy | Less than 0.3J all models |
Pulse to Pulse Repeatability | ±0.1% to 300Hz std, ±0.1% to 1000Hz optional, consult factory for higher rep rates |
Dimensions - inches (mm) | 19 (483) W x 8.72 (222) H x 17 (432) D |
Weight - lbs (kg) | 100 (46) |
Ambient Temperature | Storage: -20 to +70°C. Operating: +5 to +45°C |
Altitude | Storage: 40,000ft (12,000m), Operating: 9,900ft (3,000m) |
Humidity | 10-90%, non-condensing |
Cooling | Flowed water at 2US GPM (7.6L/min) max. inlet temperature 35°C.
All water paths are at ground potential and are copper, brass or Buna-N hose. |
Protection | Open/short circuits, Overloads, Arcs, Overtemp, Overvoltage, Safety Interlock |
Remote Control (all models) | Via 25-pin D-sub connector on rear of unit, Signals include,
Vprogram (0-10V), HV Enable/Reset, Inhibit, Summary Fault, Load Fault, Vanalog, Vpeak |
Accessories | 10ft HV cable, operating manual |
Options | EN - Low Enable. Replaces standard high enable |
5V - 0-5V Analog programming. Replaces standard 0-10V programming. |
LP - Latching Overload Protection, requires HV reset after overload fault |
DC - Continuous DC operation |
CT - AC line contactor (option for LC1202-OEM models only, standard for L and S) |
RS - Remote load voltage sense replaces local sense |
Double terminated HV cable, and mating bulkhead connector |
Ordering Info | Model - XXkV - POS (or NEG) - 3PYYY - ZZ (options) |
Ordering Examples | LC1202L-10kV-POS-3P208, LC1202S-1kV-NEG-DC-3P400 |
(1) Continuous DC output power de-rated to 12,000W average with 208VAC 3Ø line voltage
(2) Requires conversion kit supplied with unit All specifications subject to change without notice |
