德国IKA 生物反应器 HABITAT ferment dw 10-宜器服务网

产品详情

简要介绍

HABITAT ferment dw 10，即 10L 罐体套装，含发酵用 10L 双壁玻璃罐及配套罐体的搅拌驱动等。罐体套装与控制塔套装（如 HABITAT ferment）搭配，您可以获得成功培养所需的所有组件。双壁罐夹套外接恒温器以进行温控，IKA 推荐搭配 HRC 2 basic 或者 HRC 2 control等。

技术参数

Reactor	Fermenter	Sparger	Ring sparger
额定容积	10 l	Sparger, outer diameter	8 mm
Type	double wall	Sparger, inner diameter	6 mm
多次使用	是	Sparger pore size	500 μm
可高压灭菌	是	Cooling finger	Accessory
内径	190 mm	Cooling finger connection threat	M27x3 mm
Ratio = height / inner diameter	2.47	Cooling finger water connection, outer diamter	8 mm
最小使用容积	2.0 l	Stirrer design	Propeller stirrer, 6-bladed
最大使用容积	12.9 l	Stirrer diameter 6 blade impeller	68 mm
Reactor vessel material	硼硅盐玻璃	Ratio = stirrerdiameter 6blade / inner diameter reactor	0.36
Reactor lid material	不锈钢 1.4404	Stirrer quantity	2
Net weight reactor vessel	7.65 kg	Condenser	是
Net weight reactor assembled	21.9 kg	Condenser, connection threat	M16x2
Number lid ports	18	冷凝器种类	竖直冷凝管
Lid ports (Baffle)	1	Condenser Temperature min.	5 °C
Lid ports (pH)	1	Temperature min. / Condenser with Peltier	15 °C
Lid ports (Reserve)	7	Temperature min. / Condenser with water cooling	5 °C
Lid ports (Condenser)	1	Filtertype	sterile filter
Lid ports (Cooling Finger)	1	Filtermaterial	PTFE reinforced with PP
Lid ports (Inoculation)	1	Filter housing material	PP
Lid ports (Harvest Pipe)	1	Pore size	0.22 μm
Lid ports (Sparger)	1	Filter heater	是
Lid ports (Feed)	0	Spin filter	40 μm
Lid ports (4in1)	1	Baffle	Accessory
Lid ports (Temperature)	1	温度测量	是
Lid ports (DO)	1	工作温度传感器	PT1000
Lid ports (Level)	1	pH sensor	是
物料接触部分材料	AISI 316L, borosilicate glass 3.3, silicone USP class VI	pH sensor connection threat	PG 13.5
Motor coupling	shaft feedthrough	pO2 sensor	是
Harvest pipe outer diameter	6 mm	pO2 sensor connection threat	PG 13.5
Harvest pipe inner diameter	4	Level sensor	IKA HA.s.lv
Harvest pipe design	straight	Foam sensor	IKA HA.s.fo
Harvest pipe, height adjustable	是	Turbidity sensor	Accessory
Feeding port, outer diamter	4.5 mm	Conductivity sensor	Accessory
Feeding port, inner diamter	2 mm	CO2 sensor	Accessory
Feeding port, amount	4	最大转速	800 rpm
Inoculation port, outer diamter	6 mm	外形尺寸	300 x 710 x 300 mm
Inoculation port, inner diameter	4 mm