MODEL NUMBER | 9420-4 | 9420-8 | 9420-12 | 9420-24 | 9420-36 | 9420-48 | 9420-72 | 9420-96 |
AC Output Programmability |
Phases/Output Channels | Single | Single, Split-Phase | Single, Split or 3-Phase |
Voltage1 (LR,HR) | 10 - 175, 350VRMS L-N (split-phase limited to 250V max) |
Current Limit Set Ranges1 (per Ф) | 6,30A (1Ф) | 6,30A (2Ф) | 6,30A (3Ф) | 12, 60A (3Ф) | 18, 90A (3Ф) | 24, 120A (3Ф) | 36, 180A (3Ф) | 48, 240A (3Ф) |
Current Limit Set Max1 (per Source) | 6, 30A (1Ф) | 12, 60A (1Ф) | 18, 90A (1Ф) | 36, 180A (1Ф) | 54, 270A (1Ф) | 72, 360A (1Ф) | 108, 540A (1Ф) | 144,720A (1Ф) |
Power Limit Set Max2 (1, Split, 3Ф) | 4kW | 8, 8kW | 12, 8, 12kW | 24, 16, 24kW | 36, 24, 36kW | 48, 36, 48kW | 72, 48, 72kW | 96, 64, 96kW |
Maximum Apparent Power2 | 10.5kVA | 21kVA | 31.5kVA | 63kVA | 94.5kVA | 126kVA | 189kVA | 252kVA |
Frequency | 30 -880Hz with ± (0.1% Set) Accuracy | Distortion | <1% @ 60Hz (Full power into resistive load at 480VRMS (L-L)/60Hz) |
Peak Current | 3 X Max ARMS |
|
|
Phase Angle | 0 - 359° with 1° Accuracy | Slew Rate | <200µs 10-90% of full scale change to resistive load |
DC Output Programmability |
Voltage Ranges1 (LR, HR) | 10 - 200, 400VDC (< 800mV RMS Ripple) |
Current Limit Set, Max1 (per Source) | 0 - 6, 30A | 0 - 12, 60A | 0 - 18, 90A | 0 - 36, 180A | 0 - 54, 270A | 0 - 72, 360A | 0 - 108, 540A | 0 - 144, 720A |
Power Limit Set, Max2 (per Source) | 0 - 4kW | 0 - 8kW | 0 - 12kW | 0 - 24kW | 0 - 36kW | 0 - 48kW | 0 - 72kW | 0 - 96kW |
Measurements |
| Range | Accuracy | Resolution |
Voltage (LR, HR) | 260, 520V Pk |
|
|
AC RMS |
| ±(0.1% Rdg + 0.06% Rng) @<100hz, rdg="">100Hz | 0.005% Rng |
DC |
| ±(0.1% Rdg + 0.1% Rng) | 0.005% Rng |
Peak Voltage |
| ±(0.5% Rdg + 0.2% Rng) @<100hz, rdg="">100Hz | 0.005% Rng |
Current per Phase (LR, HR) | 20, 100A Pk | 20, 100A Pk | 40, 200 A Pk | 60, 300A Pk | 80, 400A Pk | 120, 600A Pk | 160, 800A Pk |
AC Current |
| ±(0.1% Rdg + 0.1% Rng) @<100hz, rdg="">100Hz | 0.005% Rng |
DC Current |
| ±(0.2% Rdg + 0.1% Rng) High Range, ±(0.2% Rdg + 0.3% Rng) Low Range | 0.005% Rng |
Peak Current |
| ±(0.5% Rdg + 0.2% Rng) @<100hz, rdg="">100Hz | 0.005% Rng |
Power (kW, kVA) | Voltage Range X Current Range | ±(0.2% Rdg + 0.1% Rng) @<100hz, rdg="">100Hz | 0.005% Rng |
Energy (AH, kWH, kVAH) | Time dependent | 0.3% Reading + 0.3% Rng | 0.005% Rng |
Power Factor | 0 to +1.0 | ±(0.25% Rdg + 0.25% Rng) | 0.005% Rng |
Crest Factor | 1 to3 | ±(0.6% Rdg + 0.6% Reading Pk) | 0.005% Rng |
Ultra-Low Current Measurement | 0.1, 1A/Ф | 0.1, 1A/Ф | 0.2, 2A/Ф | 0.3, 3A/Ф | 0.4, 4A/Ф | 0.6, 6A/Ф | 0.8, 8A/Ф |
AC Current Accuracy | ±1% Range @ < 100Hz, ± 2 % Range @ > 100Hz |
DC Current Accuracy | ±1% Range |
Waveform Capture |
Data Channels | 6 channels (3 phases of voltage and current) | Accuracy/Resolution | 0.5% Range/0.005% Range |
Bandwidth | DC to 100kHz | Background Measurements | 35 total including AC/DC Voltage, Current, True Pwr, Apparent Pwr, Freq., Pwr Factor, Crest Factor, Energy, Phase Angle, Pk V, Pk I, Pk Pwr |
Sample Rate | to 125 kSample/sec |
|
Memory | 64k samples for each of 6 channels |
|
Aperture | 1 cycle to 64 sec (longer apertures will reduce the sample rate) | Aperture Measurements | 13 total including AC/DC Voltage, Current, True Pwr, plus min/max Pks |
Custom Waveforms |
Standard | Sine, n-step Sine, Triangle, Clipped Sine, Notched Sine, Arbitrary (User Def.) | User Defined | Graphical wave shape editor or downloaded Excel table |
Control |
User Interface | No Touch Panel. GUI on PC. | Built-In Touch Panel &/or external PC w/ Windows software tools including GUI | External System Communication | LAN (Ethernet) supporting SCPI or VXI-II |
Drivers |
| Ni-Compliant LabVIEW Drivers, emPower (opt.), Enerchron (opt.) |
Safety |
UUT Programmable Limits | V Min/Max, I Max, W Min/Max, each with time delay values | Watchdog | A continuous communication verification program controlled by a test executive |
Physical | User Interlock, Emergency Stop & remote e-Stop connection |
|
Internal Protection | Over-Voltage, Over-Current, Over-Power, Over-Temperature | Self Test | An automatic hardware check upon power-up |
Isolation | Facility to Chassis - 1kV, Facility to Output - 2kV, Output to Chassis - 1kV | EMC | CE Mark |
Physical |
Connectors | Phoenix Contact | Terminal blocks and bus bars |
Form | System Only | Chassis | Chassis | Single Cabinet | Single Cabinet | Single Cabinet | Double Cabinet | Double Cabinet |
Dimensions (HxWxD) | 5U in S6xx or 5xxx | 15¾ x 19 x 28″/ 400 x 483 x 711mm | 15¾ x 19 x 28″/ 400 x 483 x 711mm | 46x23x30″/ 1168x584x762mm | 49x23x30″/ 1981x584x762mm | 61x23x30″/ 1981x584x762mm | 78x46x30”/ 1981x1168x762mm | 78x46x30”/ 1981x1168x762mm |
Weight | N/A | 150lbs/68kg | 155lbs/70kg | 480lbs/218kg | 640lbs/290kg | 780lbs/353kg | 1280lbs/581kg | 1560lbs/708kg |
Operating Temp. | 0° - 35°C, Non-Condensing |
Input Power |
Voltage | 200 - 240 1, 2, 3Ф | Universal Input - 380 to 480VAC ±10% (L-L, 3-Phase, 50/60Hz), 208VAC ±10%3 |
Frequency | 49 - 51Hz or 59.3 - 60.5Hz |
Current/phase @ 380, 400, 480V | 15A@208, 25A@200 | 17, 17, 14A | 25, 24, 20A | 49, 47, 39A | 73, 69, 58A | 97, 92, 77A | 144, 137, 114A | 192, 183, 152A |
Efficiency | 89 -92% (depending on line voltage) at full power into resistive load at 480VRMS (L-L)/60Hz |
Power Factor @ Full Power | Unity PF > 99% at full power into a resistive load at 480VRMS (L-L)/60Hz |
Cooling | Air Cooled 35°C Max Ambient, reduced power from 35 to 50°C |
Calibration |
Method | Closed-cover with standard lab equipment capable of measuring to 0.25 % of device specifications |
